Home / For Epirco drifter / ATLAS COPCO 3115600192 CHARGING DEVICE COP 1840+ EPIROC ACCUMULATOR CHARGER 3115 6001 92
Product

ATLAS COPCO 3115600192 CHARGING DEVICE COP 1840+ EPIROC ACCUMULATOR CHARGER 3115 6001 92

Refill Your COP Hammer Accumulator, No Guesswork

The ATLAS COPCO 3115600192 charging device is what we send out to crews running COP 1840+ and COP 1838hd+ breakers. It's the same setup listed under EPIROC 3115 6001 92 — a nitrogen charging kit that puts you back in control of pre-charge pressure without dragging the hammer into a workshop.

Inside the case you get a ball valve, needle valve, two hoses, a pair of manometers, the regulator, safety valve, bottle connection, plus all the small connectors, elbows and adapters you'd see on the factory diagram. Cross‑check it with ref numbers 3115342580, 3115600192, 6060024702 — it matches what Atlas Copco and Epiroc supply.

This thing is built for the kind of dust, mud and vibration you get in open‑pit mines and tunneling sites. The hoses are reinforced, the brass and steel fittings don't crack under high nitrogen pressure, and the safety valve prevents anyone accidentally overcharging the bladder. Once you get used to the needle‑valve‑and‑manometer routine, a recharge takes just a few minutes and your operator is back to breaking rock.

Get a Quote Back to For Epirco drifter
ATLAS COPCO 3115600192 CHARGING DEVICE COP 1840+ EPIROC ACCUMULATOR CHARGER 3115 6001 92
#223
Highlights
Key Advantages
  • Hooks straight onto COP 1840+ and COP 1838hd+ accumulators — same threads and pressure range as the OEM kit, no adapters needed.
  • The manometer pair gives you a real‑time look at bottle pressure and filling pressure, so you can hit the exact pre‑charge value the hammer manual calls for.
  • Safety valve is preset to bleed off before you reach dangerous bladder pressure — keeps the crew safe and the accumulator from splitting.
  • All the small parts — ball valve, needle valve, elbows, connectors — are brass or zinc‑plated steel. We haven't seen corrosion issues even in wet underground headings.
  • Comes with a labeled parts breakdown and the hose lengths are cut to the OEM spec, so you can swap a worn hose without pulling the whole kit apart.
Use Cases
Applications
  • Field‑recharging nitrogen on COP 1840+ hammers used in open‑pit mining and underground development.
  • Routine accumulator pressure checks on COP 1838hd+ breakers mounted on excavators in quarries.
  • Workshop use — pre‑setting accumulator pressure after a bladder change or seal kit rebuild.
  • Keeping a backup charging device in the site container so a flat accumulator doesn't stop production.
  • Replacement for older 3115600192 kits with cracked hoses or sticky gauges that won't hold calibration.
Specs
Technical Specifications
Part Number3115600192 (Epiroc 3115 6001 92)
Fits Hammer ModelsCOP 1840+, COP 1838hd+
TypeAccumulator Nitrogen Charging Kit
Gas TypeNitrogen (N₂) only — do not use oxygen or air
Key Components (ref.)Ball valve 3115600322, needle valve 3115342508, manometers 3115342504 / 3115600204, hoses 3115600201 / 3115600202, regulator 3115600210, safety valve 3115601421, bottle connection 3115342502, connectors, elbows, spare parts set — full list in diagram
Cross‑reference Numbers3115342580, 6060024702
Details
Detailed Description
ATLAS COPCO 3115600192 CHARGING DEVICE COP 1840+ 1838hd+ EPIROC ACCUMULATOR CHARGER 3115 6001 92 GAS CHARGING KIT

3115342580, 3115600192, 6060024702

Ref No.Part No.Description
03115600192CHARGIN DEVICE
33115600322BALL VALVE
403115342508NEEDLE VALVE
503115342504MANOMETER
603115600201HOSE
703115600202HOSE
903115342510CONNECTION
1003115600204MANOMETER
1103115342502BOTTLE CONNECT
1303115574800CONNECTION
LS3115600193LABEL SET
1403115600210REGULATOR
1503115601421VALVE.SAFETY
1603115601422ELBOW
1703115601423CONNECTOR
1803115601424ADAPTER
1903115601425PIPE.CROSS
2003115601426CONNECTOR
2103115601427REDUCER
2203115601428CONNECTOR
2303115601429ELBOW
SPS3115901187SPARE PARTS SET

FAQ
FAQ
Will this charging device work on a COP 1840+ made before the Epiroc rebrand?
Yes. The accumulator connection and recommended pre‑charge pressure stayed the same through the Atlas Copco to Epiroc transition. We ship the same kit to customers running 15‑year‑old hammers and brand‑new ones.
Do I need to buy anything extra to connect it to a nitrogen bottle?
The kit includes the bottle connection (3115342502) that screws onto standard nitrogen cylinders with the thread common in most regions. If your bottle has an unusual valve outlet, you might need a simple adapter, but 9 out of 10 customers plug right in.
Can I replace just one hose if it gets damaged on site?
Sure. We stock the individual hoses under 3115600201 and 3115600202. If you nick a hose on a sharp edge, you don't have to buy the entire kit again.
How long does delivery usually take?
We keep 3115600192 kits on the shelf. Most orders ship within 24 hours. You're looking at 2–5 business days to Europe and North America, a few days extra for remote mine sites. Express shipping is available if you're down and need it fast.
What pressure should I set for a COP 1838hd+ accumulator?
Always check the hammer service manual for the exact figure — it changes with operating conditions and ambient temperature. As a rough guide, many sites set between 50 and 60 bar for the COP 1838hd+, but don't take that as gospel. Use the needle valve to creep up slowly while watching the manometer.
Is there any warranty?
We cover manufacturing defects for 12 months. If a manometer arrives fogged or a valve seat leaks right out of the box, we'll send a replacement. Normal wear from a busy hammer schedule — like a hose that rubs against a track frame — is on you.
Stock
Check Stock & Get a Quote
Order the ATLAS COPCO 3115600192 gas charging device today. Have a couple of hammers to support? Ask about bulk pricing or a spare hose kit to keep on hand.
Send Inquiry