Home / Sandvik / 15251838 CHUCK SANDVIK 152 518 38 TAMROCK 凿岩机 漂移器 零件 hl710 hl710s hl650 套筒
Product

15251838 CHUCK SANDVIK 152 518 38 TAMROCK 凿岩机 漂移器 零件 hl710 hl710s hl650 套筒

Keep your drifter turning – 15251838 chuck, direct fit for HL710, HL710S, HL650

The 15251838 chuck slots straight into Sandvik HL710, HL710S, HL710SPE, and HL650 drifters as a no-nonsense replacement. Machined from heat-treated alloy steel, it holds the rod firmly and spins it smoothly – no wobble, no premature wear on the shank. Dimensions match originals, so swapping it out is a straightforward bolting job. When your current chuck is worn or cracked, this one gets you back to work without chasing special tools or modifications.

Get a Quote Back to Sandvik
15251838 CHUCK SANDVIK 152 518 38 TAMROCK 凿岩机 漂移器 零件 hl710 hl710s hl650 套筒
#268
Highlights
Key Advantages
  • Machined to identical specs as the original – drops in on HL710, HL710S, HL650 without any fiddling with alignment.
  • Alloy steel with proper through-hardening stands up to the constant pounding and grit that chews up softer chucks.
  • Stops rod slippage and wobble, so you don’t end up replacing shanks or keeper rings every few shifts.
  • Straight bolt-on swap – same bolt pattern, same spigot diameter. Torque it down by the book and you’re done.
  • We stock it. Typical dispatch in under 5 business days, worldwide, so your rig isn’t sitting idle.
Use Cases
Applications
  • Underground production drilling with HL710 / HL710S drifters
  • Surface bench drilling where HL650 drifters are still running
  • Tunneling jumbos that need reliable shank gripping in mixed ground
  • Quarry rock support and blast hole drilling
Specs
Technical Specifications
OEM part number reference152 518 38
Fits drifter modelsSandvik HL710, HL710S, HL710SPE, HL650
Body materialThrough-hardened alloy steel
Fitment typeDirect bolt-on, no adapters
Thread / fixing patternMatches original bolt circle and spigot diameter
Details
Detailed Description
15251838 山特维克 卡盘 备件
山特维克/汤姆洛克 152 518 38 卡盘是一款高品质的售后替换件，设计与 hl710, hl710s, hl710spe, hl650 凿岩机和漂移器型号完全兼容。此零件确保最佳性能和耐用性，是维护采矿设备的绝佳选择。

152 518 38 CHUCK SANDVIK
概述
15251838 CHUCK SANDVIK 是一款精密设计的组件，旨在确保钻井设备的最佳性能。作为凿岩机总成中的关键部件，此卡盘有助于牢固夹持和旋转钻杆，确保高效、安全的操作。按照严格标准制造，是磨损或损坏卡盘的可靠替代品，维持机械的效率和安全性。

主要特点
精密配合：设计符合精确规格，确保无缝集成到凿岩机总成中。

坚固结构：采用高品质材料制造，能够承受重型钻井作业的严苛要求。

增强性能：确保钻杆的牢固夹持和旋转，有助于更平稳操作和延长设备寿命。

易于安装：设计用于直接更换，最大限度地减少维护停机时间。

技术规格
零件号：152 518 38

组件类型：卡盘

应用：凿岩机总成

材质：高级合金钢

尺寸：按照 OEM 规格精密加工

兼容性：直接替换原装零件

兼容的山特维克型号
152 518 38 CHUCK SANDVIK 专为各种山特维克钻机中的凿岩机总成设计。已确认的兼容型号包括：

SANDVIK HL710

SANDVIK HL710S

SANDVIK HL710SPE

SANDVIK HL650

这种兼容性确保该卡盘可在多个平台上使用，为各种钻井作业提供可靠的解决方案。

应用和优势
在严苛的凿岩环境中，像 152 518 38 CHUCK SANDVIK 这样的部件在保持设备性能方面起着关键作用。通过在凿岩机总成中牢固夹持和旋转钻杆，此卡盘有助于防止对其他部件施加过度应力，降低机械故障风险。其坚固的结构确保能够承受钻井作业中典型的高压和磨蚀条件，有助于延长服务间隔并降低维护成本。

我们专注于为重型机械提供 OEM 品质的备件。我们的卓越承诺确保每个组件在性能和耐用性方面达到或超过行业标准。凭借全球分销网络，我们保证在 5 个工作日内将 152 518 38 CHUCK SANDVIK 送达您所在地，最大限度地减少停机时间，保持运营顺利进行。

订购信息
产品名称：152 518 38 CHUCK SANDVIK

库存情况：有现货

交货时间：全球发货，5 个工作日内送达

联系方式：如需报价和订购，请通过我们的网站或客服热线联系销售团队。

结论
152 518 38 CHUCK SANDVIK 是保持钻井设备效率和可靠性不可或缺的组件。其精密工程和坚固结构使其成为追求质量与性能的专业人士的首选。
FAQ
FAQ
Will this fit an HL710S and an older HL650?
Yes. It’s made to the same dimensional and tolerance specs, so it works across HL710, HL710S, HL710SPE, and HL650 drifters without modifications.
How long does this chuck actually last compared to OEM?
Real-world life varies with ground conditions and operating pressure, but the alloy and heat treatment are matched to what the OEM uses. In most applications we see a comparable service life – change it out when it shows visible wear or you start chewing up shanks.
What’s the real story on installation? Is it just unbolt and bolt on?
Pretty much. It’s a direct replacement part. You undo the old one, clean the mounting face, and torque the new one to the spec in the HL710 maintenance manual. Standard socket set usually covers it.
If I order today, how long until it lands on site?
We ship worldwide and most locations see it within 5 working days. If your country has tricky customs, add a day or two, but we’ve got the stock ready to go.
Is this an original Sandvik boxed part or a third-party alternative?
It’s a quality aftermarket replacement – not rebranded. It’s built to the same fit and material standard, but it won’t come in a yellow box. You get the same function without the OEM price tag.
Stock
Check Stock & Get a Quote
Send us your delivery address and we’ll get a quote back with a confirmed shipping date – usually under 5 working days, globally.
Send Inquiry