Home / Epirco / T35 Powerroc 3128228755 耐磨滑块 Epiroc 3128 2287 55 钻机配件 滑动件
Product

T35 Powerroc 3128228755 耐磨滑块 Epiroc 3128 2287 55 钻机配件 滑动件

Keep your Boltec running – genuine Epiroc 3128228755 slider

The Epiroc 3128228755 slider is a small but critical piece inside Boltec 235, 235h, LC, and MD rock bolting rigs. At just 0.09 kg, it sits where the feed slides back and forth, taking constant abrasion so your expensive rails and carriages don't have to. We stock these as genuine OEM – same tolerances, same material spec, no fitting headaches. If you're already replacing one, it's often smart to check the basic part set (3128310077) and the hex screws that hold everything together. Grab a few spares and cut your next shift's downtime.

Get a Quote Back to Epirco
T35 Powerroc 3128228755 耐磨滑块 Epiroc 3128 2287 55 钻机配件 滑动件
#326
Highlights
Key Advantages
  • Direct OEM replacement – drops into Boltec 235/235h/LC/MD without modification.
  • Weighs 0.09 kg, so it adds virtually no inertia to the feed system.
  • Made from the same wear-grade steel Epiroc specs for abrasive underground conditions.
  • Simple bolt-on part; swap it out in minutes with basic tools during routine PM.
  • Pair it with the 3128310077 base part set and hex screws 0147140103/0503/0003 if you're doing a full slide service.
Use Cases
Applications
  • Underground hard-rock bolting with Epiroc Boltec rigs.
  • Tunnel support installation – keeps feed alignment true cycle after cycle.
  • Production drilling in mines where sliding surfaces see dust, slurry, and shock loads.
  • Rebuilding worn feed assemblies on Boltec LC and MD fleets.
Specs
Technical Specifications
BrandEpiroc
Part Number3128228755
DescriptionSlider / Sliding piece
Compatible ModelsBoltec 235, Boltec 235h, Boltec LC, Boltec MD
Weight0.09 kg
Details
Detailed Description
品牌：Epiroc
零件号：3128228755
描述：滑动件
适用机型：Boltec 235、Boltec 235h、Boltec Lc、Boltec Md
重量：0.09kg

EPIROC - BOLTEC LC
FAQ
FAQ
Which rigs exactly does 3128228755 fit?
It's spec'd for Epiroc Boltec 235, Boltec 235h, Boltec LC, and Boltec MD. Pull your machine's parts book and match the number – if it calls for 3128228755, this one fits.
Is this slider identical to what came from the factory?
Yes. We supply genuine Epiroc, so material, hardness, and dimensions match the original. No adapter plates, no reaming holes.
How often do these sliders normally need replacement?
Depends on your ground and cycle count. In hard, abrasive rock, some crews swap them every 500–800 hours as preventative maintenance. Keep an eye on the slide clearance – when you start seeing slop or uneven wear on the rail, it's time.
What else should I order with this slider for a complete job?
Usually the basic part set (3128310077) and the relevant hex screws (0147140103, 0147140503, 0147140003). If the retainer or bolt holes are ovalized, you might need those too. Our team can pull up the full assembly drawing if you share your serial number.
How fast can I get a couple of these sent to a mine site?
We hold buffer stock and ship same or next business day for orders received before 2 PM. Express air freight to most mining hubs usually lands within 3–5 days. Urgent sites can often get it faster – just ask and we'll check real-time routing.
Stock
Check Stock & Get a Quote
Give us your serial number or parts list. We'll confirm fitment, grab stock off the shelf, and get it moving.
Send Inquiry
参考号零件号描述
03128310077基础零件套件
20147140103六角头螺钉
30147140503六角头螺钉
70147140003六角头螺钉
12