Home / Epirco / 阿特拉斯·科普柯 3201195249 导向器 3201 1952 49 钻机 采矿机械 零件 Epiroc RD 22U
Product

阿特拉斯·科普柯 3201195249 导向器 3201 1952 49 钻机 采矿机械 零件 Epiroc RD 22U

Keeps your rock drill on target, shift after shift

The Atlas Copco 3201195249 guide (also stamped 3201 1952 49) is a direct fit for Epiroc RD 22U rigs and works on RD 18U models too. If your drill steel and shank adapters are wearing faster than they should, a worn guide is often the culprit. This replacement gets alignment back to factory spec, so you spend less on consumables and less time chasing hole deviation. Built from materials that handle wet, dusty, high-vibration conditions without cracking or galling, it matches the original part right down to the heat treatment.

Get a Quote Back to Epirco
阿特拉斯·科普柯 3201195249 导向器 3201 1952 49 钻机 采矿机械 零件 Epiroc RD 22U
#288
Highlights
Key Advantages
  • Brings rock drill alignment back to spec — cuts down side-load wear on drifter components
  • OEM-matched material and tolerance stack, so it drops in without rework
  • Covers both RD 22U and RD 18U, one less part number to stock across your fleet
  • Through-hardened to resist galling and brinelling under constant percussion loads
  • Straight swap for part 3201195249 — no adapters, no modifications
Use Cases
Applications
  • Epiroc RD 22U production drills
  • Epiroc RD 18U rigs in development headings
  • Underground hard rock mining
  • Open pit and quarry blast hole drilling
  • Tunneling jumbos where Epiroc drifters are mounted
Specs
Technical Specifications
Part Number3201195249
Reference Number3201 1952 49
BrandAtlas Copco / Epiroc
ModelsRD 22U, RD 18U
ConditionNew
MaterialAlloy steel, case-hardened
Details
Detailed Description
阿特拉斯·科普柯 3201195249 导向器 3201 1952 49 钻机 采矿机械 零件 Epiroc RD 22U 

EPIROC - RD 18U

FAQ
FAQ
Will this guide fit an RD 18U even though it’s listed for RD 22U?
Yes. The same guide is used on both the RD 18U and RD 22U drifters. Check your parts book for 3201195249 to confirm.
How do I know if my current guide needs replacing?
Common signs: uneven wear on the shank adapter, growing hole deviation, or visible grooving inside the guide bore. If you measure more than 0.5 mm of wear on the ID, it’s time to swap it.
Is this an OEM part or aftermarket?
It’s made to OEM spec — same steel grade, same heat treat, same dimensions. Fits and performs like the factory guide.
What’s the typical lead time?
Most orders ship within 2–5 business days. If you’re on a tight schedule, we can quote air freight at checkout — just ask.
Can I use this guide with non-Epiroc drill steels?
Yes, as long as the shank dimensions match the Epiroc drifter spec. The guide aligns the drifter relative to the feed, not the steel brand.
Stock
Check Stock & Get a Quote
Tell us your rig model and part number — we’ll confirm fitment and get you a quote in a few hours.
Send Inquiry
参考号零件号描述
08311128801凿岩机
00686925026堵头
00686925027堵头
53115223100钻铤
10